| ITEM |
E15DMH |
| Engine type |
2-stroke,2-cylinders, Reed valve |
| Displacement |
246 cc |
| Bore x Stroke mm(in.) |
56.0×50.0(2.20×1.97) |
| Max output kw(hp) |
11(15) |
| Full throttle RPM range |
4500~5500 |
| Ignition system |
CDI |
| Starting system |
Manual |
| Steering system |
Tiller control |
| Gear shift |
Forward-Neutral-Reverse |
| Gear ratio |
2.08 (27/13) |
| Trim and tilt system |
Manual,4 positions/Shallow drive |
| Max fuel consumption |
7.7 L/h |
| Fuel tank capacity |
24L |
| Oil mixing ratio |
50:1(fuel:oil) |
| Gear oil capacity |
250cc |
| Dry weight |
38kg(S) / 40kg(L) |
| Overall width mm(in.) |
328(12.9) |
| Recommended transom height |
381mm(15 in.) / 508mm(20 in.) |
| Alternator output |
12V DC* |
| Propeller options* |
8",10",11" |
| Item |
|
|
|
|
|
| Overall length |
mm(in. ) |
1337(52.6) |
726(28.6) |
| Overall width |
mm(in. ) |
398(15.7) |
374(14.7) |
| Overall height |
mm(in. ) |
1548(60.9) |
1422(56.0) |
1548(60.9) |
1422(56.0) |
| Transom height |
mm(in. ) |
635(25) |
508(20) |
635(25.0) |
508(20) |
| Weight |
kg |
122 |
119 |
122 |
119 |
| Full throttle operating range |
r/min |
4500~5500 |
| Maximum output |
|
55.2(75)@5000 |
| Idling speed(Neutral) |
r/min |
750~850 |
| Engine type |
|
Reed Valve |
| Cylinders |
|
L3 |
| Displacement |
cm3 |
1141 |
| Bore x stroke |
mm(in. ) |
82.0 x 72.0(3.23 x 2.83) |
| Ignition system |
|
CDI |
| Control system |
|
Tiller control |
Remote control |
| Starting system |
|
Electric start |
Electric start |
| Gear positions |
|
Forward-Netural-Reverse |
| Gear ratio |
|
2.0(26/13) |
| Trim and tilt system |
|
Hydraulic elevator |
Electric tilt |
| Fuel tank capacity |
L |
24 |
| Maximum fuel consumption |
L/h |
37 |
| Mixing ratio |
Fuel: Oil |
50: 1 |
| Gear oil capacity |
cm3 |
610 |
| Propeller options* |
in |
3-13.25" x 17" or 3-13 5/8" x 13" |
contains crankshaft, crank pin, cylinder liner, diaphragm, fuel filter, mount damper, shaft, spacer, spark
plugs, starter, gear, gasket, gasket kit, impeller, key woodruff, propeller, Piston , primary pump, clutch
dog ,carburetor, bracket, upper casing, lower casing, repair kit, washer ,bolt ,pin ,spring pin, pin float,
tube, pipe, clamp, flywheel puller assy., fly puller plate, fly wheel plate, crankshaft holder, bevel gear
nut socket, bevel gear nut wrench, needle bearing puller stopper, needle bearing puller shaft, needle
bearing puller shaft guide, seal, o ring, ball, band, cartridge, tab trim, connector, water pump, collar,
fear, condenser, etc. OEM orders are also welcomed.
If you have any question and requirement, welcome to contact with us.
){kind=link}